Description
The round LED driver is a power supply for LED luminaires with a constant output current of 350 mA. It is designed to power compatible LED modules and luminaires from an AC 220-240 V mains supply, especially in installations with limited space for mounting power electronics.
Technical Specifications
Product type: LED driver
Design: Round housing
Power: 14 W
Output current: 350 mA
Output voltage: DC 22-40 V
Input voltage: AC 220-240 V
Efficiency: 82%
Power factor: 0.85
Dimensions: 42 × 22 mm
Electrical connection: Pre-wired leads
Features and Properties
LED power supply with a constant current of 350 mA.
Compact round design suitable for building into luminaires.
Separate input and output wires for connecting the mains supply and LED load.
Designed for LED loads matching the specified output voltage and current range.
Ideal For
LED panel lights.
LED ceiling lights.
Recessed LED luminaires.
Indoor LED lighting requiring a 350 mA constant current driver.
Package Contents
1× Round LED driver 14 W 350 mA.
Why Choose This Product
Meets the requirements of LED applications needing a 350 mA constant current.
The DC 22-40 V output range allows use with compatible LED loads within this range.
The round housing measuring 42 × 22 mm is perfect for installation in tight luminaire spaces.
Pre-wired leads make connection easy without needing separate terminal blocks on the driver body.
Installation and Operating Instructions
Before connecting, verify the LED load matches the 350 mA output current and DC 22-40 V output voltage.
Connect the input wires to the AC 220-240 V mains supply.
Connect the output wires to the LED load with the correct polarity.
Perform the installation with the power disconnected.
Installation must be carried out by a qualified electrician.
Safety Warnings
The device operates with AC 220-240 V mains voltage; improper handling poses a risk of electric shock.
Do not connect the driver to the power supply without a properly connected and compatible LED load.
Incorrect output polarity connection can damage the LED load or the driver.
Do not use the driver if the housing, wires, or insulation are mechanically damaged.
Ensure placement prevents overheating or contact of wires with sharp edges.
Reviews
There are no reviews yet.